Zeiss LSM 880 Operating Manual page 224

ZEISS
Fig. 285 Rotation Settings panel,
Asymmetric rotation checked
218
CHAPTER 1 - SYSTEM OPERATION
Left Tool Area and Hardware Control Tools
000000-2071-464
You can choose between symmetric rotation
(1 exponential term) and asymmetric rotation
(double exponential term) by selecting / deselecting
the Asymmetric check box (Fig. 285).
If the Asymmetric box is checked, you can define
relative amplitudes and rotational frequencies
(note, these parameters are no fit values and have
to be defined by the user).
Relative amplitudes are defined by selecting the
excitation polarization
unpolarized) and
(parallel, perpendicular or all), by pressing the
corresponding tabs, which will result in the
corresponding values displayed in the c1 and c2
display boxes. Alternatively, if others is activated,
you can type in user defined values.
Rotational frequencies can be selected by pressing
the Default tab to load the default values. The
corresponding values will be shown in the r1 and
r2 display boxes. By pressing the other tab, user
defined values can be entered.
The description box gives information on the
rotational diffusion terms.
LSM 880
polarized
(linear
the emission detection
10/2014 V_01
or