Zeiss LSM 880 Operating Manual page 48

CHAPTER 1 - SYSTEM OPERATION
ZEISS Introduction to the Software Application Layout LSM 880
Multidimensional Acquisition:
Tools for all multidimensional imaging
The tools of this tool group will only appear if selected in the selection panel below the start buttons.
Once selected by the check box, the tool will appear in the multidimensional acquisition tool group. The
tool is then active and will be used after hitting the Start Experiment button. The experiment type is
represented above the button by a graphic.
Tools / tools window
Used for setting the microscope and software functions.
Experiment Manager
This function allows selecting an Experiment Manager imaging configuration. The configuration can be
chosen in a list box. Clicking on a configuration loads the selection.
Smart Setup
• Clicking the Smart Setup button
will open the Smart setup dialog (see section
Smart Setup).
42 000000-2071-464 10/2014 V_01