Kinetic / Frap View: Additional View Type For Time Series - Zeiss LSM 880 Operating Manual

ZEISS Center Screen Area / Image Containers - Display and Image Analysis
6.15

Kinetic / FRAP View: Additional View Type for Time Series

The FRAP function permits interactive analysis of bleaching experiments, including
− Correction of FRAP data for bleaching and background,
− Fitting of FRAP data to a mono exponential or double exponential model for intensity.
Fig. 678 FRAP View Option control block
Fig. 679 Image display of a time series in the FRAP View tab
486
CHAPTER 1 - SYSTEM OPERATION
The settings of the Dimensions, Display, Player
and Graphics View Options control blocks apply.
The additional view-specific FRAP View Option
control block is shown in Fig. 678.
Any changes done with this View Option control
block are effective immediately.
The Image Display in the FRAP View shows 4
panels: the intensity-over-time diagram with the
fitted curve, the table with the fit parameters, the
intensity value data table and the image display
(see Fig. 679, Fig. 681 and Fig. 682).
To access the Kinetic / FRAP analysis view type,
load or acquire a time series data set and click on
the FRAP View tab.
000000-2071-464
LSM 880
10/2014 V_01