Setup Imaging With Airyscan Detector - Zeiss LSM 880 Operating Manual

LSM 880
5.2.7.12 Setup Imaging with Airyscan
Detector
Acquisition, Imaging
Activation
• To activate the Airyscan detector, tick the ChA
checkbox in the beam path (Fig. 118).
• Make sure to set the filter wheel for internal
and external detectors to a plate position or a
dichroic which
wavelengths.
Mirror, Emission Filters
• Select an emission bandpass filter according to
the dyes you need to detect in single track or
multitrack acquisition mode (Fig. 119).
10/2014 V_01
CHAPTER 1 - SYSTEM OPERATION
Left Tool Area and Hardware Control Tools
Setup, Detector
transmits the required
000000-2071-464
Fig. 118 Imaging Setup tool: Airyscan
detector activation
Fig. 119 Airyscan detector: Mirror and
emission filters selection
ZEISS
99