Processing - Copy - Zeiss LSM 880 Operating Manual

ZEISS
5.4.20 Processing – Copy
 standard
Tool accepts all types of image data as input. See full description of tool set for
details.
Fig. 536 Processing – Copy
382
CHAPTER 1 - SYSTEM OPERATION
Left Tool Area and Hardware Control Tools
Licensing
optional
000000-2071-464
Instrument
 LSM  ELYRA
The Copy function provides means to copy or
duplicate images.
Convert lamda to channels
Convert lamda to channels converts images
acquired in Lamda Mode to multichannel images
where each detector element represents a separate
channel in the new image (Fig. 536). All view and
processing options available for multichannel
images apply to the new image.
Copy Channel
Copy Channel produces a copy of the selected
image.
The first Select button in the selection panel
selects the active image in the Image Display as
Input Image. The Channel selection pull down
menu specifies which channel to copy.
The second Select button is used to choose a
destination image if the copied channel is to be
added to an existing image document. In the
second Channel selection pull down menu the
destination channel is specified – or a new image
document can be chosen as destination.
Pressing Apply starts the copy process.
For Z-Stacks or Time Series, the entire series
for the selected channel is copied.
Duplication
Duplication creates a new image document which
is a duplicate of the selected input image.
 Lightsheet Z.1
10/2014 V_01
LSM 880