Zeiss LSM 880 Operating Manual page 268

ZEISS
Fig. 350 Close image window
262
CHAPTER 1 - SYSTEM OPERATION
Left Tool Area and Hardware Control Tools
000000-2071-464
Pressing New will open an empty FCS
diagram. To generate data in the FCS
Diagram you have to trigger a measurement
by pressing the Snap or Start Experiment
button. After the measurement you can
store the data and open it for later use.
Stored data will be loaded in an extra FCS
diagram in the specified container.
If you close an FCS Diagram without prior
saving, you will be asked in the Close image
dialog, if you want to save the data
(Fig. 350). Press Yes to save the diagram, No
to discard the diagram or Cancel to interrupt
the process.
LSM 880
10/2014 V_01