Player - Zeiss LSM 880 Operating Manual

ZEISS Center Screen Area / Image Containers - Display and Image Analysis
Fig. 604 View Options control block - Player
The current position slider is displayed in the View Option control block Dimensions
and can also me moved manually or by entering the slice number in the input box. The
slider can be accessed only, when the player animation is off.
Start and End slider: The setting of the Start sliders limits the number of slices to be
used for the animation. Slices before Start and after End are not taken into animated.
These sliders can be changed during automatic animation.
Starts the forward motion of the automatic animation. After the last slice has been
passed, restart is made at the first slice.
Starts backward motion of the automatic animation. After the first slice has been passed,
restart is made at the last slice.
Starts the combined forward / backward motion of the automatic animation, i.e. when
the last slice has been reached, the backward motion is activated, and the forward
motion is activated again on reaching the first slice.
Stops the automatic animation.
Move to the first slice.
Move to the last slice.
Speed can be set through a slider or spin-box (selection box).
Multidimensional animations can be selected by including individual dimensions by
checking tick boxes.
428
CHAPTER 1 - SYSTEM OPERATION
6.2.3
This function allows to
− animate frames of a Z-Stack or a time series
− specify animation parameters such as range
When the image displayed in the Image Display
window is neither a Z-Stack nor a time series this
View Option control block is empty.
The Player View Option control block is con-
trolled by the following elements:
000000-2071-464

Player

and animation speed
LSM 880
10/2014 V_01