Zeiss LSM 880 Operating Manual page 523

LSM 880 Center Screen Area / Image Containers - Display and Image Analysis
If you press the Settings button, the settings
menu will pop up (Fig. 723).
In Map Selection you can determine the map
type with the Map type pull down menu (Fig.
724). You can choose between the Number
particles and the Diffusion coeffic. (µm x µm
/s) parameter maps, that will display the relative
molecule numbers –please note that if average
subtraction is performed the information on
absolute numbers is lost - and diffusion
coefficients of the mapped areas.
You can also display the informative pixels by
choosing Inf.Pix. This will display a map that
indicates, how many
meaningfully to the correlation before dropping
to zero.
If the Auto Scale check box is activated, the
maps are scaled automatically between the
highest and lowest value. If unchecked you can
enter in the Min and Max input boxes own
minimum and maximum values. All values lying
between will be accordingly scaled. Note that all
values lying outside
maximum will be displayed as black in the
maps. This option is helpful in eliminating
extreme outliers.
10/2014 V_01
CHAPTER 1 - SYSTEM OPERATION
pixels contributed
the minimum and
000000-2071-464
Fig. 723 The Map settings menu
Fig. 724 Map type pull down menu
ZEISS
517