Zeiss LSM 880 Operating Manual page 275

LSM 880
Fig. 359 Image Container with FCS Diagram containing loaded data and FCS Correlation selected
The Result Table below the diagrams displays the measuring results. The width of the columns can be
changed by moving the border lines. Also the order of the columns can be changed. For this purpose,
click on the head line of the relevant column, hold down the mouse button and move the column to the
required position. When the mouse button is released, the column is inserted in the new position. A
scrollbar at the bottom of the table allows one to view all parameters that might not fit within the width
of the table. A scrollbar on the right allows access to all repetitions.
The quality of the fit is displayed in the chi
approach zero for highest quality.
• To select a line in the table, click on it with the mouse (multiple choice is possible by pressing the Shift
or Ctrl key additionally). Selected lines are highlighted in color and displayed in the legends of the
diagrams. The corresponding graphs are shown color coded in the graphic displays.
10/2014 V_01
CHAPTER 1 - SYSTEM OPERATION
Left Tool Area and Hardware Control Tools
display box of the Fit table. The Χ
2
000000-2071-464
ZEISS
2 2
(chi ) value should
269