Zeiss LSM 880 Operating Manual page 302

CHAPTER 1 - SYSTEM OPERATION
ZEISS Left Tool Area and Hardware Control Tools LSM 880
Processing functions do not contain additional options and the field remains empty. Only those
functions will be displayed that match the dimensions of the image parameters and that can be applied
to the loaded image.
Once an Input image is selected, the Preview panel becomes available at the bottom field. It shows the
Input image (or Input Image and Input Image 2, which can be selected by pressing the respective
thumbnail) on the left and the Preview image on the right. In addition, a new View tab – the Preview
tab – is opened for the image in the Center Screen Area (Fig. 391).
Fig. 391 Preview view tab in the Left Tool Area
The Preview tab shows the preview in more detail. The Preview thumbnail is always displayed in the
Processing main tool tab, even when the view in the Image Display is changed. If in doubt which
Image is selected as processing input, always refer to the displayed thumbnails. Both Previews – in the
thumbnail as well as in the automatically generated Preview View tab in the Center Screen Area –are
immediately updated.
296 000000-2071-464 10/2014 V_01