Zeiss LSM 880 Operating Manual page 377

LSM 880
Fig. 524
Ignore Sample: This option activates an additional function to find structures within the sample that
were incorrectly labeled as beads (fiducials). These structures are not taken into account during the
Landmark Alignment process; but they are not removed from the Preview.
Expand To Maximum Volume: This checkbox is activated as default. In a multiview experiment not all
views might include all the information. When Expand To Maximum Volume is activated, the volume
of the resulting dataset after registration and fusion is determined and additional black pixel (x,y) and z-
slices are added to the views during registration. This prevents loss of data for later fusion.
Scaling x=y=z: The dimensions are downsized to the smallest to have the same size. If the scaling in
Deconvolution, PSF settings (Fig. 520) is changed, the latter will override the scaling settings here.
Individual Registration For Every Time point: If the multiview experiment has been performed over
time, this option becomes available.
− If activated, each time point generates a transformation matrix and each time point is registered
individually. As a result, the time necessary for registration is multiplied by the number of time
points and can rise substantially. However, if the motorized movement of the sample by the system
has changed (e.g. due to thermic effects on the system: not fully warmed up at start, incubation,
air conditioning of the room), the Individual Registration For Every Time point option becomes
necessary.
− If not activated, one transformation matrix is generated for all the following time points based on
the first time point. As a result, processing for registration has only to be done once which reduces
processing time.
10/2014 V_01
CHAPTER 1 - SYSTEM OPERATION
Left Tool Area and Hardware Control Tools
Dual Side Fusion – Fusion Subset in X, Preview and
Image control area
000000-2071-464
ZEISS
371