Zeiss LSM 880 Operating Manual page 384

ZEISS
Repeat the process with the Right slider and input box; here the marking lines are in blue and the
illumination slider in the image control area should be placed to 2, showing the right side
illumination of the original data.
The Preview in the image container will show the position of both sliders Left and Right as red and blue
lines respectively (Fig. 532).
To avoid a visible change in intensity along the two cut off lines, for Mean Fusion with Fusion Subset
in X, an overlap of both illumination sides should remain in the center of the image and the Blending
slider should be used to define the number of pixels used within this overlap to crossfade both
illuminations sides.
The position of the sliders Left and Right as well as the Blending value must be defined for each View
individually.
378
CHAPTER 1 - SYSTEM OPERATION
Left Tool Area and Hardware Control Tools
Fig. 531 Dual Side Fusion – Fusion Subset in X
Fig. 532 Dual Side Fusion – Fusion Subset in X, Preview
and Image control area
000000-2071-464
LSM 880
10/2014 V_01