View Option Control Tab - Zeiss LSM 710 Quick Manual

Carl Zeiss
9. View Option Control tab (View Controller)
These tabs allow individual activation / deactivation of the available View Option control
blocks by clicking on the tabs.
(The View tab Specific control tabs are marked with a blue triangle on their upper right corner.)
※ When activating the Show all mode of the View Options Area, all available view options
control tabs are shown.
9-1. Dimensions
・ modify the image display (zoom, color,
channel on/off).
・ The sections (slices) in the dimensions can
be scrolled with sliders (z-position and Time)
and also directly addressed with setting
numbers in the spin-boxes next to the sliders.
・Zoom : allows you to enlarge / reduce the zoom factor of an image.
・Channel(s) : are designed to switch on/off channels or the display of the merged image as well as to
assign color look-up tables (LUTs) to the individual channels
:
・ Crop allows to interactively define the size and orientation of a rectangular scan area on the image
displayed in the Image Display window.
:
・ Reuse transfers ALL acquisition parameters from the stored image data to the Microscope Hardware
Settings / Control tools and applies those parameters directly to the system
9-2. Display
・ Brightness, Contrast and Gamma of the displayed
image can be adjusted
・ With the Channel buttons, the effect of the slider
settings can be restricted to an individual channel.
9-3. Player
・ animate frames of a Z-Stack or a time
series
・ specify animation parameters such as
range and animation speed
LSM710 / 780 ZEN
Fig.50 Player
- 27 -