Zeiss LSM 880 Operating Manual page 3

LSM 880
How to make best use of the LSM 880 and LSM 880 NLO operating instructions:
A few symbols in these operating instructions will help you to recognize the nature and purpose of
information immediately:
The WARNING symbol warns against hazards for the user that might arise when operating the
laser.
This WARNING symbol warns against hazards from dangerously high voltages.
The CAUTION symbol warns against faults and hazards that might arise during operation and
which might cause damage to the unit.
The NOTE symbol will help you to optimally solve your work problem. It represents a practical
tip which will help you to find out which settings and methods are capable of improving or
accelerating a procedure.
The HOT SURFACE symbol warns against hazards for the user that might arise when touching
the lamp housing during operation.
The MAINS PLUG symbol remembers service personal to pull the mains plug before opening the
device housing.
Depending on the request, these operating instructions will supply you with various possibilities:
• If you want to know where to find certain general areas of information, refer to the following outline
of sections to get a general overview.
• You will find a detailed table of contents at the start of every chapter. There you will see at a glance
what topics are covered in detail.
Always remember:
10/2014 V_01
INTRODUCTION
The time you invest in getting acquainted with the product will pay
for itself many times over in your application task.
000000-2071-464
ZEISS
III