D View - Zeiss LSM 880 Operating Manual

LSM 880 Center Screen Area / Image Containers - Display and Image Analysis
6.8

2.5 D View

This function allows to
− display the two-dimensional intensity distribution of an image in an pseudo 3D mode,
− show the intensity values in profile, grid or filled mode,
− show separate distribution for each channel in a multi-channel image.
The 2.5 D button can also be used online during scanning.
The settings of the Dimensions View Options control blocks apply. The settings of Display, Player and
Graphics View Options control blocks do not apply.
Any changes done with this toolbar are effective immediately. The content of the overlay plane is
temporarily hidden while the toolbar is displayed.
The image display in the 2.5 D View Type is the same as in the 3D View Type. For a description of the
controls in the display window see section 3D Rendering Settings in VisArtplus.
In brief, the viewing plane of the Image Display window can be rotated, tilted either directly with the
mouse or by the scroll bars on the right-hand side and the bottom of the Image Display window.
Fig. 632 2.5 D View Option control tabs
10/2014 V_01
CHAPTER 1 - SYSTEM OPERATION
000000-2071-464
ZEISS
447