Operation With Pc Via The Zen 2.3 (Blue Edition) Software; Fig. 16 Colibri 7 Control Via "Microscope Components" Tool; Fig. 17 Control Menu For Colibri 7 - Zeiss Colibri 7 Operating Manual

Colibri 7
4.2.3 Operation with PC via the ZEN 2.3
(blue edition) software
Colibri 7 has been mounted on the
microscope, connected via CAN and
powered via the desktop power supply
unit.
The microscope and the PC have been
switched on.
The ZEN software (blue edition) has
been started.
4.2.3.1 Control of Colibri 7 with the
"Microscope Control" tool in the
"Locate" tab
• Click on the Locate tab in the software (see
Fig. 16).
• Expand the Microscope Control tool by
clicking on the expander.
If required, activate the Show All option.
•
Click on the Colibri 7
•
Colibri 7 control menu.
After opening, the default mode of the
control menu is Continuous.
• Switch the LEDs on or off by activating /
deactivating the respective checkbox, e.g.
(see Fig. 17).
• Adjust the brightness for the selected wave
length using the sliders, entry fields or arrow
buttons.
• Activate the excitation filter for LED 567 by
clicking on the 555 or 590 button at Excitation
filter for LED 567.
• Switch all LEDs simultaneously on or off by
clicking on Deactivate all LEDs or Activate all
LEDs.
• Click on Continuous or Gated to select the
desired mode for image acquisition (see also
next page).
02/2017
OPERATION
Controlling the Colibri 7 solid-state light source
icon to open the
423052-7344-001
Fig. 16 Colibri 7 control via "Microscope
Components" tool
Fig. 17 Control menu for Colibri 7
ZEISS
27