Left Tool Area And Hardware Control Tools; Locate Tab - Zeiss Lightsheet Z.1 Operating Manual

Lightsheet Z.1
3

Left Tool Area and Hardware Control Tools

The Left Tool Area contains all tools for system operation, image acquisition, image processing, and
maintenance.
The major functions are organized into the four main tool tabs (Fig. 38):
Locate
Inspection of sample chamber to either locate the capillary or the sample.
Acquisition
Acquiring images with the Lightsheet Z.1.
Processing
Processing images and multidimensional (multiview) images taken with the Lightsheet Z.1.
Maintain
Setting imaging, system, and firmware parameters.
By pressing the arrow left symbol on the Expand tab at the right-hand-side border, the left tool area
will collapse to the left side. The symbol changes to an arrow right symbol. By pressing the latter, the left
tool area will expand again.
3.1

Locate Tab

Locate contains all functions of the system to
locate the capillary or similar device held by the
sample holder and to also locate the sample within
its embedding medium.
02/2013
CHAPTER 4 - SYSTEM OPERATION
Left Tool Area and Hardware Control Tools
000000-1790-528
Fig. 38 Locate tab
Carl Zeiss
37