Table of Contents
Advertisement
5 Operation | 5.3 Acquiring an Image with Ethernet Connection to a LAN Network/Router
5.3 Acquiring an Image with Ethernet Connection to a LAN Network/Router
Prerequisite
ü
ü
ü
ü
Procedure
1. Start the Labscope app on the digital end device by clicking on the Labscope icon.
2. Switch on the microscope.
3. Wait until the status LED lights up continuously.
4. Wait until the Ethernet connection between microscope and the digital end device is estab-
5. Click on the center of the thumbnail.
6. Vary the zoom, the focus position, or the
7. Press the snap icon to acquire the image.
5.4 Acquiring an Image with Direct 1:1 Ethernet Connection to a Digital End
Device
Prerequisite
ü
ü
ü
Procedure
1. Start the Labscope app on the digital end device by clicking on the Labscope icon.
2. Switch on the microscope.
3. Wait until the status LED lights up continuously.
4. Wait until the Ethernet connection between microscope and the digital end device is estab-
20
A digital end device with the software Labscope is available and has already been started.
Stemi 305 cam is connected to the LAN network/router via Ethernet cable [
The digital end device is connected to the same LAN network/router.
The Ethernet DHCP status of Stemi 305 cam is off.
à
The Labscope page Microscopes View opens.
à
The four thumbnails of the virtual live images are displayed.
lished.
à
The thumbnail of the Stemi 305 cam is dis-
played.
à
The live image appears enlarged on the screen.
brightness setting of the microscope until a
smooth live image is displayed.
A digital end device with the software Labscope is available and has already been started.
Stemi 305 cam is connected to the digital end device via Ethernet cable [
The Ethernet DHCP status of Stemi 305 cam is off.
à
The Labscope page Microscopes View opens.
à
The four thumbnails of the virtual live images are displayed.
lished.
Instruction Manual ZEISS Stemi 305 cam | en-US | Rev. 1 | 435063-7021-101
ZEISS
}
18].
}
18].
Advertisement
Table of Contents
