Ipv6 Rip Update-Interval - Alcatel-Lucent 060321-10, Rev. B Cli Reference Manual

IPv6 Commands

ipv6 rip update-interval

Configures the RIPng update interval. This is the interval, in seconds, that RIPng routing updates will be
sent out.
ipv6 rip update-interval seconds
Syntax Definitions
seconds
Defaults
parameter
seconds
Platforms Supported
OmniSwitch 10K
Usage Guidelines
Use this command, along with the
Examples
-> ipv6 rip update-interval 30
Release History
Release 7.1.1; command was introduced.
Related Commands
ipv6 rip jitter
show ipv6 rip
MIB Objects
alaRipng
alaRipngUpdateInterval
OmniSwitch CLI Reference Guide
Interval, in seconds, that RIPng routing updates are sent out. Valid
range is 0–120.
default
30
ipv6 rip jitter command to configure RIPng updates.
Configures an offset value for RIPng updates.
Displays RIPng status and general configuration information.
March 2011
ipv6 rip update-interval
page 11-77