Display Ospf Routing - 3Com 7750 Series Command Reference Manual

3com switch command reference guide

Hide thumbs Also See for 7750 Series:

Table of Contents

3Com Switch 7750 Series

Command Reference Guide – Routing Protocol

Use the display ospf retrans-queue command to display the information about the

OSPF retransmission queue.

# Display the information about the OSPF retransmission queue.

<3Com> display ospf retrans-queue

The Router's Neighbors is

RouterID: 162.162.162.162 Address: 103.169.2.2

Interface: 103.169.2.5

Table 3-13 Description on the fields of the display ospf retrans-queue command

3.1.23 display ospf routing

display ospf [ process-id ] routing

process-id: OSPF Process ID, in the range of 1 to 65,535. If you do not specify a

process ID, this command applies to all current OSPF processes.

OSPF Process 200 with Router ID 103.160.1.1

Retrans list:

LSID:129.11.77.0

LSID:129.11.108.0

Router ID of neighbor router

Address of the interface, through which neighbor routers

communicate with the router

Address of the interface on the network segment

Area number of OSPF

Type of the LSA

Link State ID of the LSA

Router ID of the router that advertises the LSA

Chapter 3 OSPF Configuration Commands

Retransmit List

Area: 0.0.0.1

AdvRouter:103.160.1.1

Table of Contents