Display Ospf Routing - 3Com 5500-EI PWR Reference Manual

display ospf routing

Syntax
display ospf [ process-id ] routing
View
Any view
Parameters
process-id: OSPF process ID, in the range of 1 to 65535. If you do not specify a process ID, this
command applies to all current OSPF processes.
Description
Use the display ospf routing command to display the information about OSPF routing table.
Examples
# Display OSPF routing information.
<Sysname> display ospf routing
Routing for Network
Destination
10.110.0.0/16
10.10.0.0/16
Total Nets: 2
Intra Area: 2
Table 4-15 Description on the fields of the display ospf routing command
Destination
Cost
Type
NextHop
AdvRouter
Area
Total Nets
Intra Area
Inter Area
ASE
NSSA
OSPF Process 1 with Router ID 1.1.1.1
Routing Tables
Cost Type NextHop
1 Net 10.110.10.1
1 Stub 10.10.0.1
Inter Area: 0 ASE: 0
Field
AdvRouter
10.10.10.1
3.3.3.3
NSSA: 0
IP address of the destination network
Cost of a route
Type of route
Next hop of route
ID of the router that advertises the route
Area ID
Total number of intra-area routes, inter-area routes, external
routes, and NSSA routes
Number of intra-area routes
Number of inter-area routes
Number of external routes
Number of NSSA routes
4-27
Area
0.0.0.0
0.0.0.0
Description