Display Ospf Routing - 3Com 5500G-EI Command Reference Manual

display ospf routing

Example
To display information on the OSPF retransmission queue, enter the following:
<SW5500>display ospf retrans-queue
OSPF Process 200 with Router ID 103.160.1.1
The information displays in the following format:
The Router's Neighbors is
RouterID: 162.162.162.162 Address: 103.169.2.2
Interface: 103.169.2.5
Retrans list:
Type: ASE
Type: ASE
Syntax
process-id
display ospf [
View
All Views
Parameter
: Enter process ID of OSPF, ranging from 1 to 65535. The command is
process-id
applied to all current OSPF processes if you do not specify a process ID.
Description
Use the
display ospf routing
OSPF routing table.
Example
To view information on the OSPF routing table, enter the following:
<SW5500>display ospf routing
OSPF Process 1 with Router ID 1.1.1.1
The information displays in the following format:
Routing tables
Routing for Network
Destination Cost
10.110.0.0/16 1
10.10.0.0/16 1
Total Nets: 2
Intra Area: 2 Inter Area: 0
OSPF Configuration Commands
Area: 0.0.0.1
LSID:129.11.77.0 AdvRouter:103.160.1.1
LSID:129.11.108.0 AdvRouter:103.160.1.
] routing
command to view the information about the
Type NextHop
Net 10.110.10.1
Stub 10.10.0.1
ASE: 0 NSSA: 0
1
AdvRouter Area
1.1.1.1 0
3.3.3.3 0
199