Table of Contents
Advertisement
GE Healthcare
Revision 1
FRU/Component Index
Class
Class title
85
Mechanical sub-assemblies
95
Hydraulic components
105
Optical component
115
Chemical product
125
135
2-2
Component Description
The description is made up as follows:
Component name in the form: Type of component-Function.
Where appropriate, an identification code or that of an additional attached component follows the com-
ponent name.
For example:
-
Board-Compression PL303
-
Potentiometer-Lift + W203
There are four possible types of component (the types are not mutually exclusive)
Type
Field Replaceable Unit
Field Adjustable Unit
Main Functional Unit
Cable
2-3
Reference
This is the ePDM reference of the component or sub-assembly.
It is always given if the component is a FRU; this number is used for ordering.
If the component is not a FRU, the reference is normally not given. However, the reference can be given
in some cases when it is considered useful as an aid to identification.
Some components have two references. In this case, they are called Alternates, and the FE can order
either component. The words Alt A or Alt B at the end of the component description identify alternate
components.
2-4
Comp. (Compatibility)
An entry in this column indicates that the component must be used only on certain versions of the equip-
ment. This column may contain two types of information; a compatibility code which helps you decide
which FRU to order, and/or cross cross reference to the Product History chapter which describes the
product evolution. The codes used to define compatibility are described and defined in the
codes on page
68.
Chapter 3
Labeling
Software
FRU or renewal part
Unit containing components that provide information to the FE (e.g., a status indi-
cator light), or can be adjusted (e.g., switches, jumpers, or potentiometers)
Unit mentioned in a Functional Block Diagram (not including cables).
Examples are:
- Boards
- Main electromechanical components (e.g., motor, brake, pump)
- Displays
Cables linking sub-assemblies or assemblies
Service Information and Procedures Class A 2385072-16-8EN
Paddle
Hydraulic jack
Lens
Coolant liquid
Fixing product
Label
Software backup kit
Definition
Page no. 146
Examples
Gas Spring
Processing product
Publication
.
Senographe DS
Compatibility
Component-index-intro.fm
- Quick Links:
- Err Sub A001 - Generator Error...
Hide quick links:
Advertisement
Table of Contents
Troubleshooting
Need help?
Do you have a question about the Senographe DS and is the answer not in the manual?
Questions and answers
G.E.Essential l have recently bought What is the full weight.of the mamo Full weight of the console and other İtem's also measurements of each item with the main machine please All this Shipping Company required
The GE Senographe DS mammography machine is shipped in three crates with the following dimensions and weights:
- Crate 1 (Gantry, Generator Cabinet, and ramp):
- Dimensions: 2066 mm (81.34 in) depth × 848 mm (33.39 in) width × 2292 mm (90.24 in) height
- Mass: 641 kg (1410.2 lbs)
- Crate 2 (Control Station):
- Dimensions: 1110 mm (43.70 in) depth × 770 mm (30.31 in) width × 1850 mm (72.83 in) height
- Mass: 210.5 kg (464.07 lbs) for truck transport (without side covers and lid)
- Mass: 223.5 kg (492.73 lbs) for plane/boat transport (with side covers and lid)
- Crate 3 (Detector):
- Dimensions: 872 mm (34.33 in) depth × 2270 mm (89.37 in) width × 260 mm (10.24 in) height
- Mass: 104.4 kg (229.68 lbs)
### Total Mass:
- For truck transport: 641 + 210.5 + 104.4 = 955.9 kg (2104.95 lbs)
- For plane/boat transport: 641 + 223.5 + 104.4 = 968.9 kg (2133.61 lbs)
These values include the gantry, generator cabinet, control station, detector, and all related components.
This answer is automatically generated