GE Senographe DS Manual page 147

GE Healthcare
Revision 1
2-5 Loc (Location)
An entry in this column means that the component is mentioned in a diagram or illustration contained in
the FRU/Component Location on page
2-6 FD (Functional Diagram)
An entry in this column means that the component is mentioned in a diagram contained in the
Diagrams on page 71. A link is provided to the diagram.
2-7 Cabl (Cable Information)
An entry in this column means that the component is described in the
299. A link is provided to the description.
2-8 CL (Central Listing)
An entry in this column means that the component is described in the
is provided to the description.
2-9 FRU (Field Replaceable Unit)
The entry in this column indicates whether the component is a FRU:
• FRU Y: It is a FRU, and can be ordered.
• FRU N: It is not a FRU.
2-10 Trac (Traceability)
The entry in this column indicates FRU Traceability:
• Trac Y: the FRU is tracked by a product locator.
• Trac N: the FRU is not tracked by a product locator.
2-11 D/R (Disassembly/Reassembly)
• An entry of D/R in this column indicates that Disassembly/Reassembly of the component is explained
in a D/R Job Card. The D/R Job Card includes any required post-requisite procedures (recalibrations
and checks, etc.). A link is provided to the appropriate D/R Job Card.
• An entry of P-D/R in this column means that Disassembly/Reassembly of the component does not
require specific explanation (no D/R Job Card is provided). However, some recalibrations and/or
checks are required after changing or disturbing the component. These requirements are listed in the
Post-D/R scenario
the appropriate section.
• If the D/R column is blank, the Disassembly/Reassembly of the component is considered self-explan-
atory, and that no special recalibration or check is needed after replacement.
• If the D/R column is contains SWF, this means that Disassembly/Reassembly instruction of the com-
ponent is Supplied With the FRU.
• When a component is not a FRU (i.e. FRU N), the D/R indicated corresponds to the FRU (i.e. FRU Y)
that contains the non-FRU.
Component-index-intro.fm
185. A link is provided to the diagram or illustration.
(Scenario PDR A001 - Post-D/R Procedures on page
Service Information and Procedures Class A 2385072-16-8EN
Page no. 147
Senographe DS
FRU/Component Index
Cable Lay-out and Pin-out on page
Central Listing on page
821). A link is provided to
Functional
239. A link
Chapter 3