SSANGYONG Rexton Y200 Manual page 61

1B1-20 M162 ENGINE MECHANICAL
Removal & Installation Procedure
1. Remove the belt tensioning pulley.
Installation Notice
Tightening Torque
Pull the tensioning pulley clockwise as shown in
the figure.
YAD1B250
2. Disconnect the hydraulic pipe of the power
steering pump and drain the oil.
YAD1B090
3. Unscrew the bolts and remove the steering pump.
Installation Notice
Tightening Torque
YAD1B260
4. Remove the compressor after disconnecting the
wiring connector and refrigerant pipe of A/C
compressor.
Notice: Discharge all the refrigerant before
removing the pipes.
YAD1B270
40.5 - 49.5 N•m
(29.9 - 36.5 lb-ft)
22.5 - 27.5 N•m
(16.6 - 20.3 lb-ft)
SSANGYONG Y200