SSANGYONG Rexton Y200 Manual page 66

SSANGYONG Y200
M162 ENGINE MECHANICAL 1B1-25
Removal & Installation Procedure
1. Remove the intake air duct.
Installation Notice
Tightening Torque
YAD1B470
2. Remove the spark plug cover.
Installation Notice
Tightening Torque
Unscrew the seven (M6 x 60) bolts and remove
the spark plug cover.
YAD1B480
3. Remove the spark plug connector and ignition
cable.
YAD1B490
4. Unscrew all the bolts (2,3) and remove the head
cover and the gasket.
Installation Notice
Tightening Torque
Replace the gasket with a new one if necessary.
5. Installation should follow the removal procedure in
the reverse order.
6. Check for oil leaks by operating the engine.
YAD1B500
9 - 11 N•m
(80 - 97 lb-in)
9 - 11 N•m
(80 - 97 lb-in)
9 - 11 N•m
(80 - 97 lb-in)