SSANGYONG Rexton Y200 Manual page 71

1B1-30 M162 ENGINE MECHANICAL
6. Remove the guide rail fixing pin from the cylinder
head using the threaded pin 116 589 01 34 00 (1)
and sliding hammer 116 589 20 33 00 (2).
YAD1B620
7. Remove the cylinder head bolts in numerical order
using allen wrench socket 617 589 00 10 00.
Installation Notice
Tightening Torque
YAD1B630
8. Check the length of the cylinder head bolt.
Installation Notice
Length (L)
•
Replace the bolt if the measured length exceed
the max. length.
•
Apply the oil to the thread surface of bolt.
YAD1B640
9. Carefully remove the cylinder head and check the
mating surface.
10. Installation should follow the removal procedure
in the reverse order.
1st step: 55 N•m
(41 lb-ft)
2nd step : 90°
3rd step : 90°
New 160 ± 0.8 mm
Max. 162 ± 0.7 mm
SSANGYONG Y200