01-12
Intake actuator
It changes the air source selection
mode according to the control
command from the heater and A/C
control assembly.
PTC heater
It is mounted to the heater air
outlet in the heater module
and warms the air from the
heater to the air vent.
MOS module
It controls the rotation speed of
the blower motor by receiving the
fan speed control signal from the
heater and A/C control assembly.
A/C filter
It is mounted to the top of the
blower motor and filters the air
before it is discharged through
the duct.
Blower motor
It is mounted to the bottom of
the blower box and sends the
air inside of the vehicle.