Canon imageRUNNER ADVANCE 6075 Series Service Manual page 761

E Detail
Location Item
Code Code
E743 -0004 -04 Title DDI communication error
Remedy 1. Connection error between the Main Controller PCB and the
Reader Controller PCB.
2. Failure of the Reader Controller PCB (PCB1).
3. Failure of the Main Controller PCB.
Description The Reader Controller PCB detected the communication error
between the Main Controller PCB and the Reader Controller
PCB.
E744 -0001 -00 Title Error in language file/BootROM
Remedy Download the correct version of the language file.
Description Version of language in HDD and version of Bootable are
different.
E744 -0002 -00 Title Error in language file/BootROM
Remedy Download the correct version of the language file.
Description Size of the language in HDD is too big.
E744 -0003 -00 Title Error in language file/BootROM
Remedy Download the correct version of the language file.
Description Unable to find the language to be switched to that is
described in the Config.txt in HDD.
E744 -0004 -00 Title Error in language file/BootROM
Remedy Download the correct version of the language file.
Description Unable to switch to the language in HDD.
E744 -1000 -00 Title Error in language file/BootROM
Remedy Replace the Boot ROM with the one for the correct model.
Description The Boot ROM for the different model is installed.
E744 -2000 -00 Title Error in language file/BootROM
Remedy Replace the Soft ID with the one for the correct model.
Description When the engine ID described in Soft ID is invalid.
E744 -4000 -05 Title Engine ID error
Remedy Replace the DC Controller PCB (PCB1) or redownload.
Description The Main Controller PCB model and the DC Controller PCB
(PCB1) model are not matched.
E746 -0003 -00 Title Different Image Analysis PCB model
Remedy 1. Check the connection of the Image Analysis PCB.
2. Replace the Image Analysis PCB.
Description Different Image Analysis PCB model.
E746 -0021 -00 Title Image Analysis PCB self-check error detection
Remedy 1. Check the connection of the Image Analysis PCB.
2. Replace the Image Analysis PCB.
Description Image Analysis PCB self-check error detection.
7
Error Code > Error Code > Error Code Details > E710 to E760
Description
7 Error Code > Error Code > Error Code Details > E710 to E760
E Detail
Location Item
Code Code
E746 -0022 -00 Title Invalid Image Analysis PCB version
Remedy 1. Upgrade the Image Analysis PCB software.
2. Replace the Image Analysis PCB.
Description Invalid Image Analysis PCB version.
E746 -0023 -00 Title No reply from Image Analysis PCB
Remedy 1. Check the connection of the Image Analysis PCB.
2. Replace the Image Analysis PCB.
Description No reply from Image Analysis PCB.
E746 -0024 -00 Title Image Analysis PCB operation error
Remedy 1. Check the connection of the Image Analysis PCB.
2. Replace the Image Analysis PCB.
Description Image Analysis PCB operation error.
E746 -0031 -00 Title Hardware error (TPM)
Remedy The TPM PCB is not installed, the TPM PCB for other model
is installed, or failure of TPM Chip.
Description Hardware error (TPM).
E746 -0032 -00 Title Error in engine ID of SoftID
Remedy Format the system.
Format the HDD using SST or USB memory, and download
the system software. For details, see "Chapter 6: Upgrading".
For your reference, the method using USB memory is
described below.
1. Prepare the USB memory which system software was
registered.
2. Execute the following service mode:
COPIER>FUNCTION>SYSTEM>DOWNLOAD to enter the
download mode.
3. Insert the USB memory to the equipment.
4. Execute [4]: Format HDD in the main menu.
After formatting is completed, the machine reboots
automatically and starts with the download mode.
5. Execute [1]: Upgrade (Auto) in the main menu.
System software is downloaded and the machine restarts
automatically.
Description Mismatched data in TPM
7-76
Description
7-76