System - Canon imageRUNNER ADVANCE 6075 Series Service Manual

■ SYSTEM

COPIER > FUNCTION > SYSTEM
DOWNLOAD Shift to download mode
Lv.1 Details To make the machine enter the download mode and wait for a
command.
Perform downloading by SST.
Use case At upgrade
Adj/set/operate method 1) Select the item, and then press OK key.
2) Perform downloading by SST.
Caution Do not turn OFF the power before HOLD is displayed.
Supplement/memo SST: Service Support Tool
CHK-TYPE HD-CLEAR/HD-CHECK exe partition No.
Lv.1 Details To specify the partition number of the HDD to execute HD-CLEAR/
HD-CHECK.
Use case When executing HD-CLEAR/HD-CHECK
Adj/set/operate method Enter the value, and then press OK key.
Display/adj/set range 0 to 65535
0: Entire HDD
1: Image accumulation area
2: Universal file storage area
3: PDL file storage area
4: Program file storage area
5: MEAP application
6: Address book transfer setting
7: MEAP storage data
8: System log storage area
9: Advanced Box area
10: Area for distribution server
11: Storage area of universal data
Related service mode COPIER> FUNCTION> SYSTEM> HD-CLEAR, HD-CHECK
Supplement/memo Universal file: Management information of user setting data, various
log data, PDL spool data, and image data, etc.
HD-CHECK Entire HDD check and recovery
Lv.1 Details To check the entire HDD and execute recovery processing.
Adj/set/operate method Select the item, and then press OK key.
Caution Be sure to execute this item after CHK-TYPE.
Display/adj/set range During operation: Progress ratio (%), When operation finished
normally: OK!
Related service mode COPIER> FUNCTION> SYSTEM> CHK-TYPE
8
Service Mode > COPIER > FUNCTION > SYSTEM
8 Service Mode > COPIER > FUNCTION > SYSTEM
COPIER > FUNCTION > SYSTEM
HD-CLEAR Initialization of specified partition
Lv.1 Details To initialize the HDD partition specified by CHK-TYPE.
Use case When initializing the HDD partition
Adj/set/operate method Select the item, and then press OK key.
Caution Be sure to execute this item after CHK-TYPE.
Display/adj/set range Top 2 digits: Progress ratio (%, Returns to "00" at termination)
Last 2 digits: Result at termination (00: Normally finished, Others:
Abnormally finished)
Related service mode COPIER> FUNCTION> SYSTEM> CHK-TYPE
DEBUG-1 Setting of log type and save timing
Lv.2 Details To set the types of logs to be stored and the timing to store logs in
the HDD.
Logs are used to analyze the cause of a trouble.
Use case When analyzing the cause of a problem
Adj/set/operate method Select the item, and then press OK key.
Caution Do not use this at the normal service. Change the setting value in
accordance with the instructions from the Quality Support Division.
Display/adj/set range 0 to 3
0: Save PLOG at detection of Reboot/Exception
1: Save PLOG at detection of Reboot/Exception/Encode
2: Save SUBLOG at detection of Reboot/Exception/Encode
3: Save SUBLOG in overwrite mode at detection of Reboot/
Exception/Encode
Default value 3
Related service mode COPIER> FUNCTION> SYSTEM> DEBUG-2 (Level 2)
Supplement/memo PLOG can be printed by COPIER> FUNCTION> SYSTEM>
DEBUG-2.
SUBLOG cannot be printed. (It should be uploaded from SST.)
DSRAMBUP Backup of DC Controller PCB SRAM
Lv.2 Details To back up the setting data in SRAM of the DC Controller PCB.
Use case When replacing the DC Controller PCB for troubleshooting at the
time of trouble occurrence
Caution During operation, the setting data changes by manual or automatic
adjustment. When backup data which has been left for a long period
of time is restored, it is overwritten with new setting data and the old
data is deleted.
Related service mode COPIER> FUNCTION> SYSTEM> DSRAMRES
DSRAMRES Restore of DC Controller PCB SRAM
Lv.2 Details To restore the setting data which has been backed up in SRAM of
the DC Controller PCB.
Use case When replacing the DC Controller PCB for troubleshooting at the
time of trouble occurrence
Caution During operation, the setting data changes by manual or automatic
adjustment. When backup data which has been left for a long period
of time is restored, it is overwritten with new setting data and the old
data is deleted.
Related service mode COPIER> FUNCTION> SYSTEM> DSRAMBUP
8-114
8-114