Canon imageRUNNER ADVANCE 6075 Series Service Manual page 1160

12) Insert the assembled Option HDD into the Slot.2.
Connector side
Slot.2 (HDD2)
13) Secure the HDD Fixed Plate.
• 1 screw (Use the screws removed in "Removing the Covers" step 7).)
• 1 Screw (TP; M3x6) (Use the contents included in the Option HDD.)
x2
9
Installation > [TYPE-4] Option HDD (80GB) + HDD Mirroring Kit or HDD Data Encryption & Mirroring Kit > Installation Procedure > Installing the M
14) Connect the Signal Cable and the Power Supply Cable (included in the package) to the
HDD.
14-1) Connect the Signal Cable (550mm; FK2-7827) and the Power Supply Cable
14-2) Connect the Signal Cable (550mm; FK2-7826) and the Power Supply Cable
NOTE:
When connecting the Signal Cables, the side labeled "HDD1" or "HDD2" should be
connected to the HDD.
F-9-359
F-9-360
9 Installation > [TYPE-4] Option HDD (80GB) + HDD Mirroring Kit or HDD Data Encryption & Mirroring Kit > Installation Procedure > Installing the M
(570mm; FK2-7831) to Slot.2.
(570mm; FK2-7831) to Slot.1.
Signal Cable
(550mm; FK2-7827)
x4
Power Supply Cable
(570mm; FK2-7831)
9-163
Signal Cable
(550mm; FK2-7826)
Power Supply Cable
(570mm; FK2-7831)
F-9-361
9-163