Setting Sales Company's; Network Settings - Canon imageRUNNER ADVANCE 6075 Series Service Manual

■ Setting Sales Company's HQ
When using devices input in the markets listed below, the default setting of Sales Company's
HQ should be changed before obtaining firmware distributed from CDS. Unless the setting is
changed properly, the desired firmware may not be able to be selected.
Default Setting of Sales
Market
Company's HQ
Canada US
Latin America US/SG
Hong Kong SG
Go to the following screen to change the setting of Sales Company's HQ.
Service Setting of Device Service Mode
Technician (Level 1)
NOTE:
The list below shows the setting of Sales Company's HQ for CDS-CTS by market.
Check and adhere to the appropriate setting for your market.
<List of Sales Company's HQ and the settings for CDS-CTL>
Japan = JP
USA = US
Singapore = SG
Europe = NL
Korea = KR
6
Troubleshooting > Making Initial Checks > Preparation > Network Settings
Setting of Sales Company's
HQ after Change
CA
LA
HK
T-6-24
COPIER > FUNCTION > INSTALL > CDS-CTL
China = CN
Hong Kong = HK
Australia = AU
Canada = CA
Latin America= LA
6 Troubleshooting > Making Initial Checks > Preparation > Network Settings

■ Network Settings

1. Connecting to External Network
The method of connecting to external network is similar to a normal network connection
method. Refer to user manual of the device for details.
NOTE:
• See User Manual for how to connect the device to the external network.
• Before using UGW link or User mode, see the sections below to prepare as required.
"Enabling UGW Link"
"Enabling [Update Firmware] Button of User Mode"
"Enabling [Install Application/Options] Button of User Mode"
NOTE:
"External Network" here means the network connecting the device to CDS via Internet.
2. Confirming URL Setting of Distribution Server
This section describes how to confirm the URL setting of the distribution server.
1. Start [Service Mode] at Level 1.
1). Press [Setting/Registration (User Mode)] button on the control panel.
2). Press [2] and [8] buttons at a time on the control panel.
3). Press [Setting/Registration (User Mode)] button on the control panel.
4). [Service Mode] screen is shown.
2. Press [Updater] button.
6-75
F-6-142
6-75