Deleting Downloaded Firmware - Canon imageRUNNER ADVANCE 6075 Series Service Manual

7. When the device is restarted, confirm the version of the firmware.
1). Press [Check Counter Key] button on the control panel.
2). Press [Check Device Configuration] button.
3). Confirm if the updated firmware version corresponds to [Controller Version].
Now the firmware is successfully updated in the method.
6
Troubleshooting > Making Initial Checks > Deleting Downloaded Firmware
6 Troubleshooting > Making Initial Checks > Deleting Downloaded Firmware

Deleting Downloaded Firmware

This section describes how to delete the downloaded firmware using Updater.
1. Start [Service Mode] at Level 1.
1). Press [Setting/Registration (User Mode)] button on the control panel.
2). Press [2] and [8] button at a time on the control panel.
3). Press [Setting/Registration (User Mode)] button on the control panel.
4). [Service Mode] screen is shown.
2. Press [Updater] button.
3. Press [Update Firmware] button.
6-89
F-6-178
6-89