Copying System Software - Canon imageRUNNER ADVANCE 6075 Series Service Manual

■ Copying System Software

● System CD to SST
Copy the system software stored in the system CD to SST.
NOTE:
The system software is compressed if the file size exceeds the CD memory capacity.
If the above is the case, decompress the file before copying it to SST.
Preparation
Requirements:
• PC with SST Ver. 4.41 or later installed
• The system CD for this machine
Steps to copy the system software
1) Start the PC.
2) Set the system CD to the PC.
3) Start SST.
4) Click "Register Firmware" button.
6
Troubleshooting > Version upgrade > Version Upgrade using USB memory Storage Device > Copying System Software
F-6-114
6 Troubleshooting > Version upgrade > Version Upgrade using USB memory Storage Device > Copying System Software
5) Select the drive where the system CD is set and click "Search" button.
6) The list of the system software components stored in the system CD is shown on the
screen.
Uncheck the box(es) of unnecessary folder(s) and/or system software component(s) and
click "Copy" button.
6-59
F-6-115
F-6-116
6-59