Installing The Hdd Case Unit - Canon imageRUNNER ADVANCE 6075 Series Service Manual

5) Install the 2 HDD Lock Pins and the 2 HDD Lock Springs to the removed rail.
6) Return the rail to its original position.
• 2 Bosses
• 2 Screws (Use the screws removed in step 3).)
Hole
Hole
x2
Boss
7) Insert the HDD Drawer Unit into the hole on the HDD Case Unit to install it.
• 2 Screws (TP Round End; M3x6)
8) Close the Edge Saddle.
x2
9
Installation > [TYPE-2] Removable HDD Kit > Installation Procedure > Installing the HDD Case Unit
Boss
F-9-291
Edge Saddle
F-9-292
9 Installation > [TYPE-2] Removable HDD Kit > Installation Procedure > Installing the HDD Case Unit

■ Installing the HDD Case Unit

1) Install the HDD Case Unit.
• 2 Hooks
• 2 Bosses
• 2 Screws (Use the screws removed in "Removing the HDD and HDD Case Unit" step 11).)
NOTE:
Be careful not to catch the plate of the host machine with the Wire Saddles on the rear
side of the HDD Case Unit, otherwise the installation work may become difficult.
x2
Hook
9-127
Hook
Boss
F-9-293
9-127