Removing The Feed Driver Pcb - Canon imageRUNNER ADVANCE 6075 Series Service Manual

4
Parts Replacement and Clearning > External Auxiliary System > Removing the Feed Driver PCB
4) Free the harness and remove the Fixing Power Unit.
• 4 Connectors
• 2 Screws
x4
x2
5) Remove the Fixing Power Unit Plate.
• 5 Screws
x5
4 Parts Replacement and Clearning > External Auxiliary System > Removing the Feed Driver PCB

Removing the Feed Driver PCB

<Preparation>
1. Remove the Waste Toner Container. (Refer to page 4-145)
2. Remove the Box Cover (Left). (Refer to "Removing the DC Controller PCB")
3. Open the Controller Box. (Refer to "Removing the DC Controller PCB")
4. Remove the Rear Lower Cover. (Refer to "Removing the Power Supply Assembly")
<Procedure>
1) Remove the frame of Waste Toner Container.
• 2 Screws
• 2 Protrusions
F-4-495
F-4-496
x2
4-236
F-4-497
4-236