Canon imageRUNNER ADVANCE 6075 Series Service Manual page 951

COPIER > OPTION > CST
P-SZ-C1 Setting of Right Deck paper size
Lv.1 Details To set the paper size used in the Right Deck.
Use case Upon user's request
Adj/set/operate method 1) Enter the setting value, and then press OK key.
2) Turn OFF/ON the main power switch.
Caution Be sure to match with the hardware setting size.
Display/adj/set range 0 to 2
0: A4, 1: B5, 2: LTR
Default value 0
P-SZ-C2 Setting of Left Deck paper size
Lv.1 Details To set the paper size used in the Left Deck.
Use case Upon user's request
Adj/set/operate method 1) Enter the setting value, and then press OK key.
2) Turn OFF/ON the main power switch.
Caution Be sure to match with the hardware setting size.
Display/adj/set range 0 to 2
0: A4, 1: B5, 2: LTR
Default value 0
CST3-P1 Setting of Cassette 3 paper size
Lv.1 Details To set the paper size used in Cassette 3.
Use case Upon user's request
Adj/set/operate method 1) Enter the setting value, and then press OK key.
2) Turn OFF/ON the main power switch.
Caution Be sure to match with the hardware setting size.
Display/adj/set range 0 to 1
0: A5R, 1: STMTR
Default value USA: 1, Countries other than USA: 0
Related user mode Preferences> Paper Settings> Paper Settings> A5R/STMTR Original
Selection
CST3-P2 Setting of Cassette 3 paper size
Lv.1 Details To set the paper size used in Cassette 3.
Use case Upon user's request
Adj/set/operate method 1) Enter the setting value, and then press OK key.
2) Turn OFF/ON the main power switch.
Caution Be sure to match with the hardware setting size.
Display/adj/set range 0 to 1
0: B5, 1: EXEC
Default value USA: 1, Countries other than USA: 0
Related user mode Preferences> Paper Settings> Paper Settings> B5/EXEC Original
Selection
8
Service Mode > COPIER > OPTION > CST
8 Service Mode > COPIER > OPTION > CST
COPIER > OPTION > CST
CST4-P1 Setting of Cassette 4 paper size
Lv.1 Details To set the paper size used in Cassette 4.
Use case Upon user's request
Adj/set/operate method 1) Enter the setting value, and then press OK key.
2) Turn OFF/ON the main power switch.
Caution Be sure to match with the hardware setting size.
Display/adj/set range 0 to 1
0: A5R, 1: STMTR
Default value USA: 1, Countries other than USA: 0
Related user mode Preferences> Paper Settings> Paper Settings> A5R/STMTR Original
Selection
CST4-P2 Setting of Cassette 4 paper size
Lv.1 Details To set the paper size used in Cassette 4.
Use case Upon user's request
Adj/set/operate method 1) Enter the setting value, and then press OK key.
2) Turn OFF/ON the main power switch.
Caution Be sure to match with the hardware setting size.
Display/adj/set range 0 to 1
0: B5, 1: EXEC
Default value USA: 1, Countries other than USA: 0
Related user mode Preferences> Paper Settings> Paper Settings> B5/EXEC Original
Selection
CST3-U1 Set Cst3 overseas special ppr category 1
Lv.1 Details To set the overseas special paper category 1 used in Cassette 3.
Use case Upon user's request
Adj/set/operate method 1) Enter the setting value, and then press OK key.
2) Turn OFF/ON the main power switch.
Display/adj/set range 0 to 43
0: Special paper is not used, 1 to 22: Not used, 23: K-LGL-R, 24:
FLSP, 25: A-FLSP, 26: OFI, 27: E-OFI, 28: B-OFI, 29: Not used, 30:
A-LTRR, 31: Not used, 32: G-LTRR, 33: A-LGL, 34: G-LGL, 35 to 36:
Not used, 37: M-OFI, 38 to 41: Not used, 42: FA4, 43: FB4 (FLSP-R)
Default value 0
CST3-U3 Set Cst3 overseas special ppr category 3
Lv.1 Details To set the overseas special paper category 3 used in Cassette 3.
Use case Upon user's request
Adj/set/operate method 1) Enter the setting value, and then press OK key.
2) Turn OFF/ON the main power switch.
Display/adj/set range 0 to 31
0: Special paper is not used, 1 to 21: Not used, 22: K-LGL, 23 to 28:
Not used, 29: A-LTR, 30: Not used, 31: G-LTR
Default value 0
8-169
8-169