Making Initial Checks; List Of Initial Check Items - Canon imageRUNNER ADVANCE 6075 Series Service Manual

Making Initial Checks

List of Initial Check Items

Item No.
Site Environment 1 The voltage of the power supply is as rated (±10%).
2 The site is not a high temperature / humidity environment (near
a water faucet, water boiler, humidifi er), and it is not in a cold
place. The machine is not near a source of fire or dust.
3 The site is not subject to ammonium gas.
4 The site is not exposed to direct rays of the sun. (Otherwise,
provide curtains.)
5 The site is well ventilated, and the floor keeps the machine
level.
6 The machine's power plug remains connected to the power
outlet.
Checking the Paper 7 The paper is of a recommended type.
8 The paper is not moist. Try paper fresh out of package.
Checking the 9 Check the cassette and the manual feed tray to see if the
Placement of Paper paper is not in excess of a specific level.
10 If a transparency is used, check to make sure that it is placed
in the correct orientation in the manual feed tray.
Checking the 11 Check the table of durables to see if any has reached the end
Durables of its life.
Checking the 12 Check the scheduled servicing table and the periodically
Periodically replaced parts table, and replace any part that has reached the
Replaced Parts time of replacement.
6
Troubleshooting > Making Initial Checks > List of Initial Check Items
Detail
6 Troubleshooting > Making Initial Checks > List of Initial Check Items
Check
T-6-21
6-73
6-73