Canon imageRUNNER ADVANCE 6075 Series Service Manual page 421

4
Parts Replacement and Clearning > Image Formation System > Removing the Primary Charging Wire Cleaner, Cleaner Holder (Right/Left)
CAUTION:Points to Caution when Installing the Primary Charging Wire Cleaner Holder
Be sure to push in the Primary Charging Wire Cleaner Holder until it is secured with the
Claw.
3) Bring up the Primary Charging Assembly and pinch the Hook to remove the Primary
Charging Assembly Cleaner Holder (Right) in the direction of the arrow.
4 Parts Replacement and Clearning > Image Formation System > Removing the Primary Charging Wire Cleaner, Cleaner Holder (Right/Left)
F-4-94
F-4-95
4) Remove the Primary Charging Wire Cleaner (Right) in the direction of the arrow.
CAUTION:
Be careful not to damage the Primary Charging Wire and the Grid Wire when removing
the Primary Charging Wire Cleaner (Right).
CAUTION:Points to Caution at Installation
Be sure to push the Charging Wire against the 2 pads of the Primary Charging Wire
Cleaner to install.
Pad
Charging Wire
Primary
Charging
Wire Cleaner
4-100
F-4-96
F-4-97
4-100