2
Technology > System Management Operations > How to Replace Devices
How to Replace Controller Boards
The steps are different depending on which of 2 controller boards are to be replaced.
• Main Controller Board PCB 1
No steps follow.
• Main Controller Board PCB 2 (including SRAM)
The network and service mode setting should be set again after initialization. See
"Overview of Preparation" in chapter 2 of this manual for details.
2
Technology > System Management Operations > How to Replace Devices
How to Replace Devices
All settings should be set again because no data are inherited. See "Overview of Preparation"
in chapter 2 of this manual for details.
2-260
2-260