Canon imageRUNNER ADVANCE 6075 Series Service Manual page 938

COPIER > OPTION > USER
MB-CCV Control card usage limit for Mail Box
Lv.2 Details To restrict use of control card for Mail Box.
Use case Upon user's request
Adj/set/operate method 1) Enter the setting value, and then press OK key.
2) Turn OFF/ON the main power switch.
Display/adj/set range 0 to 1
0: Unlimited, 1: Limited
Default value 0
CONTROL Charge setting of PDL job
Lv.1 Details To set charge count transmission of PDL job to the connecting
charging management device (Coin Manager or non-Canon-made
control card).
Use case Upon user's request
Adj/set/operate method 1) Enter the setting value, and then press OK key.
2) Turn OFF/ON the main power switch.
Display/adj/set range 0 to 1
0: No charge, 1: Charge
Default value 0
B4-L-CNT Count setting of B4 size
Lv.1 Details To set B4 count with software counter 1 to 8 as to whether B4 is
counted as large size or small size.
Selecting 1 counts B4 or larger size paper as large size while paper
smaller than B4 size as small size.
Use case Upon user's request
Adj/set/operate method 1) Enter the setting value, and then press OK key.
2) Turn OFF/ON the main power switch.
Display/adj/set range 0 to 1
0: Small size, 1: Large size
Default value 0
Related service mode COPIER> OPTION> FNC-SW> SC-L-CNT
TRY-STP Set of Fin Tray output suspension ref
Lv.2 Details To set the reference which judges to suspend outputting to Finisher
Tray.
Use case Upon user's request
Adj/set/operate method 1) Enter the setting value, and then press OK key.
2) Turn OFF/ON the main power switch.
Display/adj/set range 0 to 1
0: At detection of full tray, 1: At detection of height
Default value 0
8
Service Mode > COPIER > OPTION > USER
8 Service Mode > COPIER > OPTION > USER
COPIER > OPTION > USER
MF-LG-ST Dis/hide of long strip mode
Lv.2 Details To set whether to display or hide the [Long Original] button.
When 1 is set, [Long Original] button is displayed in Copy > Options
screen and the long strip paper becomes available.
Use case Upon user's request (use of long strip original or long strip paper)
Adj/set/operate method 1) Enter the setting value, and then press OK key.
2) Turn OFF/ON the main power switch.
Display/adj/set range 0 to 1
0: Hide, 1: Display
Default value 0
Related user mode Copy > Options
Supplement/memo Up to 630mm length paper is supported when DADF is used.
CNT-DISP Display/hide of serial No.
Lv.2 Details To set whether to display or hide the serial No. on the Counter Check
screen.
Use case When setting to display/hide serial No. on the Counter Check screen.
Adj/set/operate method 1) Enter the setting value, and then press OK key.
2) Turn OFF/ON the main power switch.
Display/adj/set range 0 to 1
0: Display, 1: Hide
Default value 0
PH-D-SEL Set dither matrix at screen processing
Lv.2 Details To set the screen dither matrix to be used for halftoning processing
at the time of copy output, B&W Inbox scan output and B&W SEND
output.
When moire occurs frequently, set to "1: 141 lines".
When the setting is changed, the number of PG lines to be output at
PASCAL control is also changed.
Use case When moire frequently occurs at the time of copy output, B&W
Inbox scan output and B&W SEND output. Especially when moire
frequently occurs in the halftone density area of photo and image
gradation areas
Adj/set/operate method 1) Enter the setting value, and then press OK key.
2) Turn OFF/ON the main power switch.
Display/adj/set range 0 to 1
0: 134 lines, 1: 141 lines
Default value 1
Related service mode COPIER> OPTION> USER> PH-D-SL2
8-156
8-156