Debug-1; Function - Canon imageRUNNER ADVANCE 6075 Series Service Manual

6
Note:
Date to be added to the file name shows the date that the log was transferred.
Display it by time of local Time.
6
Troubleshooting > Debug log > DEBUG-1 > Function
F-6-188
Troubleshooting > Debug log > DEBUG-1 > Function

DEBUG-1

■ Function

Service Mode Lev.2
COPIER > FUNCTION > SYSTEM > DOWNLOAD > DEBUG-1
DEBUG-1 Setting of log type and save timing
Lv.2 Details To set the types of logs to be stored and the timing to store logs in the HDD.
Logs are used to analyze the cause of a trouble.
Use case When analyzing the cause of a problem
Adj/set/operate Select the item, and then press OK key.
method
Caution Do not use this at the normal service. Change the setting value in accordance
with the instructions from the Quality Support Division.
Display/adj/set 0 to 3
range 0: Save PLOG at detection of Reboot/Exception
1: Save PLOG at detection of Reboot/Exception/Encode
2: Save SUBLOG at detection of Reboot/Exception/Encode
3: Save SUBLOG in overwrite mode at detection of Reboot/Exception/Encode
Default value 3
6-107
F-6-189
T-6-28
6-107