Removing The Power Supply Assembly - Canon imageRUNNER ADVANCE 6075 Series Service Manual

4
Parts Replacement and Clearning > External Auxiliary System > Removing the Power Supply Assembly

Removing the Power Supply Assembly

<Preparation>
1. Remove the Box Cover (Left). (Refer to "Removing the DC Controller PCB")
2. Open the Controller Box. (Refer to "Removing the DC Controller PCB")
3. Remove the Rear Lower Cover.
3-1) Remove the Rear Lower Cover in the direction of the arrow.
• 3 Screws
x3
<Procedure>
1) Free the Harness from the Wire Saddle.
4 Parts Replacement and Clearning > External Auxiliary System > Removing the Power Supply Assembly
2) Disconnect the 23 Connectors and free the Harness to the top of the Power Supply
Assembly.
3) Remove the Power Supply Assembly in the direction of the arrow.
• 2 Screws
F-4-487
F-4-488
x23
x2
4-234
F-4-489
F-4-490
4-234