Removing The Etb Unit - Canon imageRUNNER ADVANCE 6075 Series Service Manual

4
Parts Replacement and Clearning > Image Formation System > Removing the ETB Unit

Removing the ETB Unit

<Preparation>
1. Pull out the Fixing Feed Unit.
1-1) Open the Front Cover.
1-2) Turn the Fixing Feed Unit Pressure Release Lever in the direction of the arrow to pull
out the Fixing Feed Unit.
4 Parts Replacement and Clearning > Image Formation System > Removing the ETB Unit
1-3)
out the Fixing Feed Unit until it stops.
F-4-189
CAUTION:
Do not touch the surface of the ETB when handling the ETB Unit.
Push to release the Release Springs at both sides of the Rail, and then further pull
4-137
F-4-190
4-137