Canon imageRUNNER ADVANCE 6075 Series Service Manual page 927

COPIER > OPTION > NETWORK
NS-GSAPI Limit GSSAPI auth method at SMTP auth
Lv.2 Details To restrict use of GSSAPI authentication method at the time of SMTP
authentication.
Use case Upon user's request
Adj/set/operate method 1) Enter the setting value, and then press OK key.
2) Turn OFF/ON the main power switch.
Display/adj/set range 0 to 1
0: SMTP server-dependent, 1: Not used
Default value 0
Supplement/memo SMTP authentication: Protocol in which user authentication
function is added to SMTP, which is the protocol to be used
for e-mail transmission. At the time of e-mail transmission, this
protocol executes authentication of the user account and the
password between the SMTP server and the user to approve e-mail
transmission only when it's authenticated.
NS-NTLM Limit NTLM auth method at SMTP auth
Lv.2 Details To restrict use of NTLM authentication method at the time of SMTP
authentication.
Use case Upon user's request
Adj/set/operate method 1) Enter the setting value, and then press OK key.
2) Turn OFF/ON the main power switch.
Display/adj/set range 0 to 1
0: SMTP server-dependent, 1: Not used
Default value 0
Supplement/memo SMTP authentication: Protocol in which user authentication
function is added to SMTP, which is the protocol to be used
for e-mail transmission. At the time of e-mail transmission, this
protocol executes authentication of the user account and the
password between the SMTP server and the user to approve e-mail
transmission only when it's authenticated.
NS-PLNWS Limit plaintext auth at SMTP auth encry
Lv.2 Details To restrict use of PLAIN/LOGIN authentication, which is plaintext, at
the time of SMTP authentication under the environment where the
communication packet is encrypted.
Use case Upon user's request
Adj/set/operate method 1) Enter the setting value, and then press OK key.
2) Turn OFF/ON the main power switch.
Display/adj/set range 0 to 1
0: SMTP server-dependent, 1: Not used
Default value 0
Supplement/memo SMTP authentication: Protocol in which user authentication
function is added to SMTP, which is the protocol to be used
for e-mail transmission. At the time of e-mail transmission, this
protocol executes authentication of the user account and the
password between the SMTP server and the user to approve e-mail
transmission only when it's authenticated.
8
Service Mode > COPIER > OPTION > NETWORK
8 Service Mode > COPIER > OPTION > NETWORK
COPIER > OPTION > NETWORK
NS-PLN Limit plaintext auth at SMTPauth noencry
Lv.2 Details To restrict use of PLAIN/LOGIN authentication, which is plaintext, at
the time of SMTP authentication under the environment where the
communication packet is not encrypted.
Use case Upon user's request
Adj/set/operate method 1) Enter the setting value, and then press OK key.
2) Turn OFF/ON the main power switch.
Display/adj/set range 0 to 1
0: SMTP server-dependent, 1: Not used
Default value 0
Supplement/memo SMTP authentication: Protocol in which user authentication
function is added to SMTP, which is the protocol to be used
for e-mail transmission. At the time of e-mail transmission, this
protocol executes authentication of the user account and the
password between the SMTP server and the user to approve e-mail
transmission only when it's authenticated.
NS-LGN Limit LOGIN authentication at SMTP auth
Lv.2 Details To restrict use of LOGIN authentication at the time of SMTP
authentication.
Use case Upon user's request
Adj/set/operate method 1) Enter the setting value, and then press OK key.
2) Turn OFF/ON the main power switch.
Display/adj/set range 0 to 1
0: SMTP server-dependent, 1: Not used
Default value 0
Supplement/memo SMTP authentication: Protocol in which user authentication
function is added to SMTP, which is the protocol to be used
for e-mail transmission. At the time of e-mail transmission, this
protocol executes authentication of the user account and the
password between the SMTP server and the user to approve e-mail
transmission only when it's authenticated.
MEAP-PN HTTP port No.setting of MEAP application
Lv.2 Details To set HTTP port number of MEAP application.
Use case Upon user's request
Adj/set/operate method 1) Enter the setting value, and then press OK key.
2) Turn OFF/ON the main power switch.
Caution Do not specify port 8080 when the Print Server is connected.
Otherwise, you cannot browse the device RUI in which MEAP
authentication application is running (Port 8080 is reserved for
redirection of EFI Controller to the iR side.)
Display/adj/set range 0 to 65535
Default value 8000
8-145
8-145