Canon imageRUNNER ADVANCE 6075 Series Service Manual page 1096

■ Installing the Expansion Bus-F1/F2 and the IPSec Board-B2
Simultaneously
1) Install the Expansion PCB to the Riser Support Plate.
• 2 Screws (TP; M3x6) (Included in the Expansion Bus Kit)
x2
2) Install the 3 PCB Spacers.
9
Installation > Installation Procedure for Expansion Bus-F1/F2, IPSec Board-B2 and Wireless LAN Board-B1 > Installation Procedure > Installing th
3) Insert the Expansion PCB into the connector on the Main Controller PCB 1 to install it.
• 3 Screws (TP; M3x6) (Included in the Expansion Kit)
4) Insert the IPSec PCB into the connector on the Expansion PCB to install it.
• 2 Screws (TP; M3x6) (Included in the IPSec Board)
F-9-231
F-9-232
9 Installation > Installation Procedure for Expansion Bus-F1/F2, IPSec Board-B2 and Wireless LAN Board-B1 > Installation Procedure > Installing th
x3
x2
9-99
F-9-233
F-9-234
9-99