Canon imageRUNNER ADVANCE 6075 Series Service Manual page 758

E Detail
Location Item
Code Code
E717 -0001 -00 Title Communication error with the NE Controller
Remedy Check the cable, and then go through the following to clear
the error: Service Mode > COPIER > FUNCTION > CLEAR >
ERR.
Description Error when the NE Controller is started.
The NE Controller which was connected before turning OFF
the power is not connected at power-on.
E717 -0002 -00 Title Communication error with the NE Controller
Remedy Check the cable, and then go through the following to clear
the error: Service Mode > COPIER > FUNCTION > CLEAR >
ERR.
Description IPC error at NE Controller operation.
Open circuit of IPC, unable to recover the IPC communication.
E719 -0001 -00 Title Error in coin manager
Remedy Check the cable, and then go through the following to clear
the error: Service Mode > COPIER > FUNCTION > CLEAR >
ERR.
Description Error when the coin manager is started.
The coin manager which was connected before turning OFF
the power is not connected at power-on.
E719 -0002 -00 Title Error in coin manager
Remedy Check the cable, and then go through the following to clear
the error: Service Mode > COPIER > FUNCTION > CLEAR >
ERR.
Description IPC error at coin manager operation.
Open circuit of IPC, unable to recover the IPC communication.
When open circuit of the pickup/delivery signal cable is
detected.
Invalid connection is detected.
E719 -0003 -00 Title Error in coin manager
Remedy Check the cable, and then go through the following to clear
the error: Service Mode > COPIER > FUNCTION > CLEAR >
ERR.
Description Communication error with the coin manager occurs during
unit price acquisition at startup.
E719 -0011 -00 Title Error when the Card Reader is started
Remedy Check the cable, and then go through the following to clear
the error: Service Mode > COPIER > FUNCTION > CLEAR >
ERR.
Description The Card Reader which was connected before turning OFF
the power is not connected at power-on.
7
Error Code > Error Code > Error Code Details > E710 to E760
Description
7 Error Code > Error Code > Error Code Details > E710 to E760
E Detail
Location Item
Code Code
E719 -0012 -00 Title IPC error at Card Reader operation
Remedy Check the cable, and then go through the following to clear
the error: Service Mode > COPIER > FUNCTION > CLEAR >
ERR.
Description Open circuit of IPC, unable to recover the IPC communication.
E719 -0031 -00 Title Communication error when the Card Reader (serial) is started
Remedy 1. Check the cable connection of the Card Reader (connector
connection error, open circuit), and then go through the
following to clear the error: Service Mode > COPIER >
FUNCTION > CLEAR > ERR.
2. After removing the Card Reader, execute the following
service mode, and then reinstall the Card Reader.
• COPIER>FUNCTION>CLEAR>CARD
• COPIER>FUNCTION>CLEAR>ERR
Description Unable to start communication with the Card Reader at
startup.
E719 -0032 -00 Title Communication error after the Card Reader (serial) is started
Remedy Check the cable connection of the Card Reader (connector
connection error, open circuit), and then go through the
following to clear the error: Service Mode > COPIER >
FUNCTION > CLEAR > ERR.
Description Although communication with the Card Reader was possible
at startup, it became unavailable in the middle of it.
E720 -0001 -05 Title Different model error
Remedy Check the configuration of options.
Description Not proper Finisher is connected.
E720 -0002 -05 Title Different model error
Remedy Check the configuration of options.
Description Not proper Option Deck is connected.
E730 -1001 -00 Title PDL software error
Remedy 1. PDL reset processing.
2. Turn OFF and then ON the power.
Description Initialization error.
E730 -100A -00 Title PDL software error
Remedy 1. PDL reset processing.
2. Turn OFF and then ON the power.
Description Systematic fatal error, such as initialization failure, occurs.
7-73
Description
7-73