Reporting To The System Administrator At The End Of The Work (Only When Hdd Data Encryption & Mirroring Kit Has Been Installed); Execution Of Auto Gradation Adjustment - Canon imageRUNNER ADVANCE 6075 Series Service Manual

Checking after Installation
1) Open the HDD Cover, and check that the LED is flashing.
• The green LED of HDD1 (Slot1) is flashing.
9
Installation > [TYPE-6] HDD Data Encryption & Mirroring Kit > Execution of Auto Gradation Adjustment
Reporting to the System Administrator at the End of the
Work
When you have completed all installation work, report to the system administrator for the
following:
At the point when installation is completed, make explanations about how to check that
the appropriate security function has been added and enabled so that, when the function
becomes uncontrolled, the system administrator can immediately detect the problem and
request <Servicing work when a failure occurs>.
Completion of the Installation Work:
Ask the system administrator to make sure that '2.00' or '2.01' is indicated for 'Canon MFP
Security Chip' as the version information of the security chip by referring to the description
of Checking the Security Version.
Maintenance of the Security Functions:
Ask the system administrator to check the security mark to make sure that the security
F-9-435
functions are maintained each time the machine is started up by referring to the description
of Checking the Security Mark.

Execution of Auto Gradation Adjustment

When this product is installed, the machine initializes its HDD, resetting the data used for
auto gradation adjustment.
Therefore be sure to execute auto gradation adjustment (full adjust) after installing this kit.
9 Installation > [TYPE-6] HDD Data Encryption & Mirroring Kit > Execution of Auto Gradation Adjustment
9-208
9-208