Canon imageRUNNER ADVANCE 6075 Series Service Manual page 531

4
Parts Replacement and Clearning > Pickup/Feed System > Cleaning the Pickup and Fixing Feed Assembly
3) Insert lint-free paper into the clearance between the Registration Upper Guide and the
Registration Lower Guide, and clean the feed area [B] and the sheet on the edge of the
Registration Upper Guide.
CAUTION:
Be careful not to damage the sheet on the edge of the Registration Upper Guide.
Sheet
[B]
4) Open the Registration Upper Guide and clean paper dust on the Registration Sensor (PS29)
with a blower.
4 Parts Replacement and Clearning > Pickup/Feed System > Cleaning the Pickup and Fixing Feed Assembly
F-4-401
PS29
F-4-402
5) Point the leading edge of Blower to the Static Eliminator and clean adhered soiling.
6) Remove the Fixing Feed Cover (Upper).
• 1 Screw
4-210
F-4-403
F-4-404
4-210