Separation Failure Jam Due To Deformation Of Separation Claw - Canon imageRUNNER ADVANCE 6075 Series Service Manual

[Remedy]
Changing the setting value in the following service mode improves the problem of a black
line.
COPIER > ADJUST > AE > AE-TBL: Text density adjustment when adjusting image density
Setting value: Change the default (5) to 3
COPIER > OPTION > IMG-MCON > SHARP: Setting of the sharpness level on the image
Setting value: Change the default (3) to 1
COPIER > OPTION > USER > PH-D-SL2: Setting of the halftone processing in text/photo
mode
Setting value: Change the default (0) to 2
CAUTION:
When performing a field remedy, remind that the scan result changes as follows:
• Scanning of light halftone base is skipped (to be scanned as white color)
• Blur text outline due to reduced edge emphasis level with the text
• Photo part appears coarsely
6
Troubleshooting > Image Faults > Separation Failure Jam due to Deformation of Separation Claw
6 Troubleshooting > Image Faults > Separation Failure Jam due to Deformation of Separation Claw
Separation Failure Jam due to Deformation of
Separation Claw
[Location]
Drum Separation Claw
[Cause]
When the paper enters to the drum at separation failure, the Separation Claw may be
deformed. When the Separation Claw is deformed, the paper is easily caught by the leading
edge of the Separation Claw when the paper (especially curled paper) is fed, and a jam (Jam
Code: 0205) is likely to occur.
[Condition]
Job after a jam which occurs when the paper enters to the drum
When using curled paper (when using backside of printed paper, etc.)
[Field Remedy]
Replace the Separation Claw.
NOTE:
Replace the Separation Claw when a separation failure jam occurs even once..
6-11
F-6-14
6-11